Stamp-peding My Way Through Life

Poppystamps Fall Thank You

Robin TharaldsonComment

Hi everyone! Today I'm sharing my Poppystamps Thank You card with you. This card uses the Stitched Oak Trio and Stitched Maple Trio die sets from Poppystamps 2017 Holiday release!

PS Aug 30 Full.jpg

Another card using my growing pile of "can't throw out, will be useful for another project" cardstock scraps! I will never us them all and one of these days I will just fill my trash can and start over! The detail in the Fall leaves add interest and texture, plus I love almost anything stitched.

PS Aug 30 CU1.jpg

The Thank You Streamer die was cut three times and layered using spray adhesive. I flicked a warm gold metallic watercolor onto the wreath and card front. 

PS Aug 30 CU2.jpg

To keep my wreath round I used one of the Pointed Circle Frame dies and attached my leaves. I added glue to the base of the leaves ONLY; it made it much easier to tuck the leaves in and add where needed.

Thanks for stopping by,

New Signature 2.jpg

Holiday Blog Blitz - Magical Christmas with Poppystamps

Robin Tharaldson1 Comment

Hi everyone! GREAT news, I'm a member of the Poppystamps Design Team! I'm still doing my happy dance; do you think it will count as cardio?  This is my first post for Poppystamps and I am very excited to be a part of the Holiday 2017 release. If you haven't seen the Holiday 2017 release you really need to grab a cup of coffee/tea and a chair and just sit and take a look! 

I used several new dies and stamps from the Holiday 2017 release, My double fold card features the Open Hillside, Sloping Hillside and Snowscape dies along with the word dies "believe" and "magic". My double fold card started with a 5 1/2" x 12" piece of white cardstock; I then scored at 4" from each end.

This is the front panel...

This is the second panel...

And here is the third panel!

I used the Do You Believe stamp set to add my sentiments and the star, from the same set, was heat embossed using silver embossing powder.

I cut the words believe and magic from glitter cardstock. To add dimension, the words were also cut 2x each from white cardstock, glued and layered together along with the glitter words. To finish my card I added Stampendous Crystal Snow to the trees and hillside. 

Be sure to leave a comment, you have until August 17, each day of the Poppystamps Blog Blitz, for your chance to win a preselected die. The prize for today is the Sloping Hillside die used in my post today! Winners will be announced August 18th! Good Luck!!!

Thanks for stopping by,

 

 

Happy Mother's Day with Lawn Fawn

Robin TharaldsonComment

Here's wishing everyone, moms, grandmoms, great-grandmoms and moms of all levels...Happy Mother's Day!!!

Here is an easy Mother's Day Card using Lawn Fawn products. With a change of sentiment this card could be for many occasions.

The flowers were made using the Flower Power die set and patterned paper from the Perfectly Plaid Rainbow Petite Paper Pad.

I created the opening using Zig Zag Circles and Scripty For You.

For more information take a look at this video!

Happy Mother's Day!!!

 

 

It's been awhile...

Robin TharaldsonComment

Well, it has been a very long time since I last posted.  What can I say?  Life happens and the older you get the faster time seems to slip away.  Two weeks before Christmas, DH and I went fishing for 10 days on the sportfishing boat Excel! Had an amazing time fishing down the coast of Baja California; I caught my first Wahoo, Grouper, Yellowfin and a bunch of rock cod! 

We did not get home until December 22!! Oh my, won't do that again!  It was a bit of a "push" to get Christmas dinner together AND clean the house.  Never did get the tree up, lol!

Then off to CHA with Lawn Fawn...

It was a lot of work setting up the booth, decorating and helping with orders! My feet were tired to say the least...BUT it was fun!!!

Then DH had BOTH knees replaced, yup both!! He handled it very well and after about a week he was walking WITHOUT his walker. 

There were about 60 to 70 staples in each incision! As you can see I have had my hands full!

So, I hope to post more often but I am semi retired now, working at Lawn Fawn a couple days a weekj and if another fishing trip comes up, I'm gone!

Thanks for stopping by,

Give Thanks with Lawn Fawn!

Robin Tharaldson2 Comments

It's almost turkey day! Hope your turkey is thawing, all your grocery shopping is done (almost) and you will have time to (maybe) put your feet up!

I have been working at Lawn Fawn (I know...way too cool!) for the last few weeks and it is overwhelming! All their products, in one place, totally sensory overload! I get to see the NEW release weeks before and even get to play with it!  AND there is a special "something, something" for you on Black Friday, so hop on over to their blog and sign up for the newsletter to find out all about it!

My card starts with a top fold kraft card base. I cut a piece of paper from the perfectly plaid fall petite paper pack at an angle and adhered it to my card base.  I then cut a kraft piece with the same angle and embossed the edge with a die from the stitched borders die set, added it to the top of my card and sponged all edges with walnut ink.

The Fall leaves were cut using stitched leaves and small stitched leaves die sets from cardstock and paper from the perfectly plaid fall petite paper pack. On one of the leaves I heat embossed "give", from the thankful mice stamp set, in gold.

The scripty thanks was cut, 3 times, from dark brown cardstock and then stacked together for a more dimensional look. I added a natural cord bow and a few sequins to finish the card!

I hope all of you have a wonderful Thanksgiving! 

Thanks for stopping by,

MFT Super Star Card Contest

Robin TharaldsonComment

In case you missed it MFT is having a Super Star Card Contest with a GREAT prize package! When I saw the post for MFT's contest I thought this is just the inspiration for me to get designing again!

My first card uses MFT's Fall Foliage stamp and die set.  I added a sheet from the Tribal Prints paper pack onto an A2 top fold card base. I then added the Die-namics Striped Sentiment Strip Cover Up to my card front by applying glue to the edges of the die cut only. To add more dimension I like to stamp images onto patterned paper, in this case the same paper as my background. The foliage was stamped using MFT's Premium Dye Ink Cubes that I received in the Flashy Florals Card Kit. Love those colors, so Fall!

Thankful 1.jpg

The foliage was cut out with the coordinating die set and tucked into the background die cut. I added liquid pearls to the berry branches and a simple twine bow. 

The "thankful" die is from the Fresh Cut Flowers card kit and was cut from a sheet of Copper Sparkle Card Stock. For dimension the word was adhered to another die cut and then added to the card front. The simple sentiment is from the Thankful Thoughts stamp set and was embossed using copper embossing powder. I finished the card with a few sequins.

I cut the background for my next card from MFT's Off the Grid paper pack using the large background die from Die-namics Blueprints 27.  The background was added to my card base with foam tape.

I "made" my cake using Die-namics Stitched Mini Scallop Squares and Die-namics Stitched Mini Scallop Rectangles. The layers were cut from a pearlized card stock and I added silver liquid pearls to each scallop using a small stylus. With these two die sets you can make stacked cakes ANY size you need!!  I wrapped silver thread around the cake layer and added a simple bow.

Anniversary Cake 2.jpg

Happy Anniversary, from the Essential Sentiments stamp set, was stamped onto Translucent Vellum using VersaMark ink and silver embossing powder. The little silver hearts were left over from another project and were cut from Die-namics Blueprints 11. I added the sentiment strip to the card front with a spot of glue behind each heart!!  A sprinkle of dew drops finished the card.

My last card features the LJD Birthday Greetings stamp set. I covered an A2 card base with paper from the Sensational Stitched Flowers card kit! Love the kraft backgrounds in the pack!

The banners were cut out using the Die-namics Stitched Jumbo Fishtail Banner STAX. The large brown banner was stamped using Arrow Ends Background Builder stamp and Black Licorice Hybrid Ink . My leaves were made using Die-namics Layered Leaves. The solid leaf was cut from a Cherry Adhesive-Backed Sheet and then colored using Distress Inks. The outline of the leaves were cut from a copper card stock.

Both sentiments were stamped with MFT Milk Chocolate Hybrid Ink and then the banners were added to the card front along with the leaves.

To finish the card a copper strip cut from Die-namics Blueprints 15 and two copper buttons were added. This makes a great masculine birthday card! 

Thanks for stopping by...